We use Little Giant Pumps for our animal tanks. This pump looks sturdy, but it often fails if you don't lubricate it like every 6 months or so like a Harley Davidson. You have to baby-sit it all time. Just like HD, this Little Giant is proudly made in the USA. By the way, I saw Georgia Aquarium uses Iwaki pumps, which are more like Honda in reliability compared to HD. Today, I had to shut down one of our tanks to replace the filter. Then, this little giant failed to restart.
So I had to restore it.
Here’s the tricky part: you need a flat-head screwdriver and a hammer to remove this small flip mechanism.
Components include: the water propeller, motor, inlet-outlet section, main shaft with fan, end cover, and magnet ring.
Inside the motor, everything needs a thorough cleaning.
Showing posts with label aquarium. Show all posts
Showing posts with label aquarium. Show all posts
Monday, September 13, 2010
Dissecting a Little Giant
Friday, June 11, 2010
New Lab
We, Katz lab, and the Neuroscience Institute have moved to the new building near Georgia State MARTA Station.
We are on the 8th floor.

Cool-looking building. Tornado-proof? Probably not.
My rig room has a window. I can see the horizon while poking cells!
Our aquarium is now 30 sec away from the lab. This is great.
I did lots of plumbing work to install new filtering system and protein skimmers. This is a hard work. I have had 3 leakage from various PVC joints I made. One of them was due to a crack that was developed during weekend. By Monday morning, half of the tank water leaked out.
One of the chillers failed because the compressor overload protector had fallen off and disconnected the power. I opened it up the chiller and rewired the circuit to skip this failed protector. Now it is running fine.
I was also in panic when I found the other chiller heated up in the morning. The radiator fan was not running. The water was like hot tub. I opened the chiller and found that the fan blade was stuck by touching the frame. I mended it back and now its working fine like new.
Setting up the aquarium is like buying a new Harley Davidson. You will have trouble after trouble until the machinery gets settled.
I would definitely buy Honda.
We are on the 8th floor.

Cool-looking building. Tornado-proof? Probably not.
My rig room has a window. I can see the horizon while poking cells!
Our aquarium is now 30 sec away from the lab. This is great.
I did lots of plumbing work to install new filtering system and protein skimmers. This is a hard work. I have had 3 leakage from various PVC joints I made. One of them was due to a crack that was developed during weekend. By Monday morning, half of the tank water leaked out.
One of the chillers failed because the compressor overload protector had fallen off and disconnected the power. I opened it up the chiller and rewired the circuit to skip this failed protector. Now it is running fine.
I was also in panic when I found the other chiller heated up in the morning. The radiator fan was not running. The water was like hot tub. I opened the chiller and found that the fan blade was stuck by touching the frame. I mended it back and now its working fine like new.
Setting up the aquarium is like buying a new Harley Davidson. You will have trouble after trouble until the machinery gets settled.
I would definitely buy Honda.
Subscribe to:
Posts (Atom)